Servo vision CO.,LTD

 
BVC-320 HD VGA Digital Camera(3.2MP)
Product
SERIES:BVC Series VGA Digital Camera
MODEL:BVC-320
INTRODUCTION:BVC-320 VGA digital camera adopts a standard VGA output interface. The camera can be directly connected to monitors, projectors and other equipment for real-time video display and images storage, without the connection to a PC. The frame-rate up to 15fps, the resolution is 2048X1536. There is a USB interface on top of the digital camera, an outside flash disk with USB2.0 interface is required to store images. Users can operate with the remote controller to add cross lines on the videos, preserve images in the flash disk, adjust parameters like exposure and three-color gain. Images are high-definition and without shaking, it is the best choice for industrial image capture
   

Specification

Sensor

1/2” 3.2MP colorful CMOS image sensor

Resolution

2048X1536

Output interface

VGA output

Frame rate

15fps

Signal to noise ratio

45dB

Camera interface

C/CS

Storage

USB storage( USB support up to 2G )

Control functions

Wireless remote control, R, G, B gain, exposure, "#" cross line position adjustment and parameters preserve

Operating temperature

0°C-60°C

power consumption

2.1W

Dimension

130*78*45mm

 

 

 

 

 

 

 

 Application

BVC-320 can be applied to digital storage of files, graphic identification, microscopic image analysis and processing, fingerprint/palmprint identification, component testing, scientific research, industrial inspection, public security, license plate capture, traffic monitoring and other fields

 

1.    Connected to a LCD screen with a lens.

The VGA digital camera can be connected to a LCD screen. An objective lens is needed to install on the digital camera. A stand is needed to install the VGA digital camera and the LCD screen.

 

2.    Connected to a LCD screen on a microscope.

The VGA digital camera is installed on a monocular microscope and connected to a screen, which can display real-time images. Images can be stored in a flash disk.

 

3.   Connected to a projector.

The VGA digital camera is installed on a monocular microscope and connected to a projector, which can display real-time images. Images can be stored in a flash disk.  

Image Transfer Software

The format of captured images is “RAW”, users can use the included software to transfer the images to “BMP” or “JPG” format.

 

 
 
 
 
 
Servo vision CO.,LTD © 2010
Office :900/230 Sukhumvit 103,Bangna,Bangna,Bangkok 10260
Tel :(662)-743-2441-2 Fax :(662)-7495833